Diatone MAMBA MK4 H743 V2 55A/65A 128K Flight Control Stack 30mm/M3

This stack will keep you up to date a long time supporting both BetaFlight and INAV firmware! Combined with the 4-in-1 ESC it's a perfect match. You can connect to it via the SpeedyBee app!

MAMBA MK4 H743 V2 Flight Control 30mm/M3

• MCU: 480MHz STM32H743
• GYRO: DUAL ICM-42688-P
• Target：MAMBA H743_2022B
• OSD: Yes
• Blackbox: 128M Flash Memory
• Barometer: SPL06
• Uarts: 8Set
• I2C: Yes
• F.Port: Yes
• RSSI: No
• Buzzer Pad: Yes
• CURR Pad: Yes
• ESC Signal: 8 Set
• ESC Soft: Dshot300/600/1200
• ESC Telemetry: Yes
• Power Led: Yes
• LED Controller: BF LED/MB LED
• AIR UNIT Port: Yes
• WIFI: SpeedyBee APP
• VTX Switch: Yes
• Receiver Protection: Yes
• TVS Protection: Yes
• BEC:3.3V 0.5A& 5V 3A& 9V 3A
• Input: 3~6S Lipo (12.6~25.2V)
• Mounting size: 30.5mm/M3

MAMBA F55_128K ESC

• Input voltage: 3~6S Lipo (12.6V~25.2V)
• Continue current:55A×4
• Burst current:65A (10S)
• BEC: No
• Target：BLHeli_32 MAMBA F55_128K
• SOFT: Dshot300/600/1200
• PWM:24~128K
• TVS Protection: Yes
• Mounting size: 30.5mm/M3

MAMBA F65_128K ESC

• Input voltage: 3~6S Lipo (12.6V~25.2V)
• Continue current:65A×4
• Burst current:75A (10S)
• BEC: No
• Target：BLHeli_32 MAMBA F65_128K
• SOFT: Dshot300/600/1200
• PWM:24~128K
• TVS Protection: Yes
• Mounting size: 30.5mm/M3
FC ONLY Supply :
• 8pin sh1.0 ×1
• AIR UNIT sh1.0 ×1

STACK Supplies:

• High Frequency 1000uF/35V ×1
• 8pin sh1.0 ×2
• AIR UNIT sh1.0 ×1
• 12AWG 100mm ×2
• AMASS Original XT60×1

INAV Users:

If you try INAV's firmware, you need to add the control of USER2 in the AUX list (INAV needs to set the remote switch to control the opening and closing of WIFI due to official restrictions)

Downloads and manuals

• Mamba H743V2 Dual ICM42688P Flight Controller and Stack
• SpeedyBee App